Get Adobe AcrobatSome documents linked to from this page require the free Adobe Acrobat Reader. If you do not have Acrobat, download it here.

Aleph CM360-33 Passive Infrared DetectorAleph CM360-33 Passive Infrared Detector

  • Selectable detection patterns
  • Sensitivity control
  • Pulse count and LED selectable
  • 4 Dual Pyro elements

 

Specifications

Specifications CM360-33
Pattern Coverage Length 33 Ft. / 10 m max
Width 100 Ft. / 30 m diameter
Detection Method Passive Infrared
Detection Zones 10 Zones
Power Supply 10.6 to 16 VDC
Current Consumption 33mA max / 16 mA nominal
Alarm Output N.C. Solid State Relay/Dry Contact Rating 30 VDC / 100 mA max
Alarm LED Operation Alarm: On Steady / 2 sec.
Flashing: During unit warm-up (60 sec)
Continuously On: When sensor/circuit fault is present.
Supervision Detector latches in alarm when sensor fault is present
Selectable Coverage Four Options: 90°, 180°, 270°, 360°
Sensitivity Control Two-Way Adjustable - High / Low, via Sw - 3
Pulse Count Control Two-Way Adjustable - 2 / 4, via Sw - 4
LED Control Enabled/Disabled - via Sw - 5
Environmental Operating Temperature: -20° C to 50° C / -4° F to 122° F
Humitity: 95% RH Max
Installation Application Indoors / Level Ceiling
Dimensions 2.17 in (H) x 5.87 in (Diameter) / 55 mm x 149 mm
Weight 7 oz. / 200g

Download the complete specifications sheet.
Download the installation guide.

 

Dimensions

Aleph CM360-33 Passive Infrared Detector

 

Detection Pattern

Mounting Height Detection Area
33.3 feet 50 ft. radius
30 feet 41.6 ft. radius
28 feet 38.3 ft. radius
26 feet 35 ft. radius
24 feet 31.6 ft. radius
22 feet 28.3 ft. radius
20 feet 25 ft. radius
18 feet 21.6 ft. radius
16 feet 18.3 ft. radius

Aleph CM360-33 Passive Infrared Detector

© 2012 Aleph America Corporation. All rights reserved. Privacy Policy    |    Terms of Use    |    Sitemap