 OJ-161
|
| |
| Maximum Ratings (Ta=25 °C) |
 |
| Item |
Symbol |
Value |
| Light Emitting Side |
Forward Current |
IF |
40mA |
| Reverse Voltage |
VR |
3V |
| Power Dissipation |
PD |
75mW |
| Light Receiving Side |
C-E Voltage |
VCEO |
30V |
| E-C Voltage |
VECO |
5V |
| Collector Current |
IC |
20mA |
| Collector Power Dissipation |
PC |
100mW |
| Operating Temperature 1 |
TOPR |
-25~+85 °C |
| Storage Temperature |
TSTG |
-40~+85 °C |
| Soldering Temperature |
TSOL |
260 °C |
|
| 1: Non Dew |
| |
| Electrical Characteristics (Ta=25 °C) |
|
| Item |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Light Emitting Side |
Forward Current |
VF |
IF=20mA |
- |
- |
1.5 |
V |
| Reverse Voltage |
IR |
IF=5V |
- |
- |
10 |
mA |
| Peak Wavelength |
lP |
IF=20mA |
|
940 |
|
nm |
| Light Receiving Side |
Off-State Collector Current |
ICEO |
VCE=10V
IF=0mA |
- |
- |
0.2 |
mA |
| Peak Wavelength |
lP |
- |
|
800 |
|
nm |
| Transmitting |
On-State Collector Current |
IC (on) |
VCE=5V
IF=20mA |
0.5 |
2.0 |
15 |
mA |
| C-E Saturation Voltage |
VC (sat) |
IF=20mA
IC=400mA
|
- |
- |
0.4 |
V |
| Switching Time |
Rise Time |
tr |
VCC=10V
2
IF=20mA
RL=1kW |
- |
15 |
- |
ms |
| Fall Time |
tf |
- |
15 |
- |
ms |
|
| Note 2: |
 |
| |
| Mechanical Characteristics |
|
| Vibration Resistance |
To withstand 10~55~10Hz, 1.5mm amplitude
and 1 minute sweep time in X, Y and Z directions, each for
2 hours. |
| Shock Resistance |
294m/S2 (30G) or more. |
|
| |
| Connection Diagram |
|
 |
|
| Terminal No. |
Signal |
| 1 |
Anode |
| 2 |
Cathode |
| 3 |
Collector |
| 4 |
Emitter |
|
| |
| Detecting Position Characteristics (Reference)
(IF=20mA, VCE=5V, Ta=25°C) |
|
| |
|
 |
| |
| Outline Dimensions |
|
 |
|
| Tolerance: ±0.3mm |
| |
 |
| |
| Installation Hole Dimensions (Reference) |
|
 |
| Part Side Measurement
Tolerance: ±0.1mm |
| |
| Parts Construction List |
|
| No. |
Description |
Qty. |
Materials |
Remarks |
| 1 |
Case |
1 |
PBT (G15%) |
Flammability: UL94V-2 or more |
| 2 |
Light Emitting Diode |
1 |
- |
GaAs Infrared Light Emitting Diode |
| 3 |
Detector |
1 |
- |
Photo Transistor |
|
| |
| Handling Notes |
|
- Careful attention should be made to avoid deformation of
components.
- Environmental air must be free from corrosive gasses such
as hydrogen sulfide or salt water air.
- Mount sensor away from direct sunlight and incandescent light.
- The side with emitting and receiving elements should be handled
very carefully.
- Do not wash sensors. Liquid may get into the case and cause
damage. If you must clean the surface area, use a soft cloth
damped with a washing fluid such as methanol or isopropyl alcohol.
- Degrading LED radiant power should be addressed if sensor
is used repeatedly over a long period of time.
- This product was designed for use in the following applications:
- OA equipment, video equipment, consumer electronics, communication
equipment, measuring equipment, and control equipment.
- When designing a system for safety and reliability, be
sure to incorporate fail-safe and other appropriate measures
|
| |
