 OM-371-A8
|
| |
| Maximum Ratings (Ta=25 °C) |
 |
| Item |
Symbol |
Value |
| Input |
Forward Current |
IF |
50mA |
| Forward Current Derating 1 |
DIF/°C |
-0.33mA/°C |
| Reverse Voltage |
VR |
5V |
| Pulse Forward Current |
IFP |
600mA 2 |
| Output |
C-E Voltage |
VCEO |
30V |
| E-C Voltage |
VECO |
5V |
| Collector Current |
IC |
50mA |
| Collector Power Dissipation |
PC |
75mW |
| Collector Power Dissipation Derating |
DPC/°C |
-1mW/°C |
| Operating Temperature |
TOPR |
-25~+85 °C |
| Storage Temperature |
TSTG |
-40~+85 °C |
|
1: Ta>25 °C
2: __<=100ms,
__=100Hz |
| |
| Electrical Characteristics (Ta=25 °C, VCC=5V±10%) |
|
| Item |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Input |
Forward Voltage |
VF |
IF=10mA |
1.00 |
1.15 |
1.30 |
V |
| Reverse Voltage |
IR |
VR=3V |
- |
- |
10 |
mA |
| Peak Wavelength |
lP |
IF=20mA |
|
940 |
|
nm |
| Output |
Off-State Collector Current |
ICEO |
VCE=16V
IF=0mA |
- |
0.005 |
0.1 |
mA |
| Peak Wavelength |
lP |
- |
|
870 |
|
nm |
| Coupled |
Light Current |
IL 3 |
VCE=5V
IF=20mA
L=6mm 4 |
80 |
- |
1400 |
mA |
| Leak Current |
ILEAK |
VCE=5V
IF=20mA |
- |
500 |
0.4 |
nA |
| Switching Time |
Rise Time |
tr |
VCC=5V
IC=2mA
RL=100W |
- |
15 |
50 |
ms |
| Fall Time |
tf |
- |
15 |
50 |
ms |
|
Note 3:
Note 4: |
 |
| |
| Mechanical Characteristics |
|
| Vibration Resistance |
To withstand 10~55~10Hz, 1.5mm amplitude
and 1 minute sweep time in X, Y and Z directions, each for
2 hours. |
| Shock Resistance |
294m/S2 (30G) or more. |
|
| |
| Connection Diagram |
|
 |
|
| Terminal No. |
Signal |
| 1 |
Collector |
| 2 |
Cathode - Emitter |
| 3 |
Anode |
|
| |
| Outline Dimensions |
|
 |
|
| Tolerance: ±0.3mm |
| |
 |
| |
| Installation Hole Dimensions (Reference) |
|
| 
Plate Thickness: t=1mm
Plate Thickness: t=1.2mm
|
| Tolerance: ±0.1mm |
| |
| Parts Construction List |
|
| No. |
Description |
Qty. |
Materials |
Remarks |
| 1 |
Case |
1 |
Polycarbonate |
Flammability: UL94V-2 or more |
| 2 |
Inner Case |
1 |
Polycarbonate |
Flammability: UL94V-2 or more |
| 3 |
PCB |
1 |
CEM-3 |
Flammability: UL94V-0 |
| 4 |
Connector |
1 |
175489-3 |
AMP (Natural) |
| 6 |
Light Emitting Diode |
1 |
- |
GaAs Infrared Light Emitting Diode |
| 7 |
Detector |
1 |
- |
Photo Transistor |
|
| |
| Handling Notes |
|
- Careful attention should be made to avoid deformation of
components.
- Environmental air must be free from corrosive gasses such
as hydrogen sulfide or salt water air.
- Mount sensor away from direct sunlight and incandescent light.
- The side with emitting and receiving elements should be handled
very carefully.
- Do not wash sensors. Liquid may get into the case and cause
damage. If you must clean the surface area, use a soft cloth
damped with a washing fluid such as methanol or isopropyl alcohol.
- Degrading LED radiant power should be addressed if sensor
is used repeatedly over a long period of time.
- This product was designed for use in the following applications:
- OA equipment, video equipment, consumer electronics, communication
equipment, measuring equipment, and control equipment.
- When designing a system for safety and reliability, be
sure to incorporate fail-safe and other appropriate measures.
|
| |
