HYR-2031-1 - Close Differential |
| Specifications/Dimensions |
| Item |
Value |
| Contact Form |
1A |
| Contact Position1 |
C |
| Contact Material |
Ruthenium3 |
| Max. Contact Rating |
3W |
| Max. Switching Voltage |
100VDC |
| Max. Switching current |
0.11A |
| Max. Initial Contact Resistance |
200mW |
| Pull in Value (AT) |
15-50 |
| Min. Drop out Value (AT) |
75% ratio min. |
| Min. Breakdown Voltage2 |
200VDC |
| Max. Contact Capacitance |
0.6pF |
| Min. Insulation Resistance |
1010W |
| Typ. Resonant Frequency |
3kHz |
| Electrical Life (Resistive loads) |
107 (5VDC,
10mA)
5 X 105 (100VDC, 100mA) |
| Features |
Close differential |
- C: Center gap O: Off center gap
- Breakdown voltage specifications are
based on Pull-In sensitivity of 25 AT or higher. Contact
ALEPH for information for switches with less than 25 AT
sensitivity. HYR4000, HYR5000, HYR9000 Series are specified
on basis of the lowest AT Pull-In sensitivity range.
- Ruthenium Oxide over Palladium.
|
 |
|
| |
| Test Coil - TC-0502 |
Test Coil |
| Number of Turns |
5,000 |
| Wire Gauge |
AWG #40 |
| Coil Resistance |
420W |
|
 |
|
|
