Note: LG, LJ, MG and MJ product are not recommended to new designs
| Part Number | Nominal Voltage (VDC) |
Coil Resistance (ohms) ±10% |
Operate Voltage (VDC) max. |
Release Voltage (VDC) min. |
Schematics |
|---|---|---|---|---|---|
| WJ1A**BW WG1A**BW |
5 12 24 |
500 1000 2000 |
3.8 9.0 18.0 |
0.5 1.0 2.0 |
![]() |
| LJ1A**BW LG1A**BW |
5 12 |
500 1000 |
3.8 9.0 |
0.5 1.0 |
![]() |
| MJ1A**BY MG1A**BY |
5 12 |
150 600 |
3.8 9.0 |
0.5 1.0 |
![]() |
| LJ1B**BW LG1B**BW |
5 12 |
500 500 |
3.8 9.0 |
0.5 1.0 |
|
| LJ1C**CW LG1C**CW |
5 12 |
200 500 |
3.8 9.0 |
0.5 1.0 |
![]() |
TAMB. = +20°C
(E.S.S.) : Electrostatic Shield
| Parameters | LJ1A**BW MJ1A**BY LJ1B**BW |
LG1A**BW MG1A**BY LG1B**BW |
LJ1C**CW LG1C**CW |
WJ1A**BW WG1A**BW |
|
|---|---|---|---|---|---|
| Power (W) max. | 10 | 3 | 50 | ||
| Voltage (VDC) max. | 150 | 100 | 200 | ||
| Switching Current (A) max. | 0.5 | 0.25 | 1.0 | ||
| Carry Current (A) max. | 1.0 | 0.5 | 2.0 | ||
| Contact Resistance (ohms) max. (initial) | 0.2 | 0.2 | 0.2 | ||
| Breakdown Voltage (VDC) min. | Open Contact | 200 | 200 | 250 | |
| Contact to Coil | 500 | 500 | 1500 | ||
| Insulation Resistance (ohms) min. | Open Contact | 1010 | 109 | 10 | |
| Contact to Coil | 1010 | 109 | 10 | ||
| Operate Time (mS) max (incl. bounce) | 1.0 | 2.0 | 0.5 | ||
| Release Time (mS) max. | 0.5 | 2.5 | 0.5 | ||
| Electrical Life | Low Level | 3 X 108 (10mVDC, 10µA) | 1 X 108 (10mVDC, 10µA) | 1 X 107 (10mVDC, 10µA) | |
| Rated Load | 8 X 105 (20VDC, 0.5A) | 2 X 106 (12VDC, 0.25A) | 1 X 106 (100VDC, 0.5A) | ||
(resistive loads)
| LJ1A-1B | LG1A-1B |
|---|---|
![]() |
![]() |
| WJ1A-BW | MJ1A |
![]() |
![]() |
| MG1A | WG1A-BW |
![]() |
![]() |
| LJ1C | LG1C |
![]() |
![]() |