Aleph OJ-1001 Opto Sensor

  • Photo IC output, Internal Schmitt trigger circuit
  • Sensing slot width 3mm (0.12″)
  • Directly compatible with TTL, LSTTL, CMOS
  • Wide supply voltage range (4.5V to 16VDC)
  • Reverse output models available
Sensing Slot Width 3mm
Aperture Width 0.5mm
Output Type Photo IC
Dimensions (L X W X H) 13 X 6 X 10mm
 

Maximum Ratings (Ta=25°C)

Item Symbol Value
Input Forward Current IF 50mA
Reverse Voltage VR 5V
Output Supply Voltage VCC 16V
Output Current IO 50mA
Allowable Power Dissipation PO 250mW
Operating Temp. Topr -25° ~ +85°C
Storage Temp. Tstg -30° ~ +90°C
 

Electrical Characteristics (Ta=25°C)

Item Symbol Conditions Min Typ Max Unit
Input Forward Voltage VF IF=10mA 1.0 1.15 1.3 V
Reverse Current IR VR=5V 10 µA
Output Operating Supply Voltage VCC 4.5 16 V
Low Level Output Voltage VOL IOL=16mA
VCC=5V
IF=0
0.15 0.4 V
High Level Output Voltage VOH IF=21mA
VCC=5V
4.0 V
Low Level Supply Current ICCL IF=0
VCC=5V
6 15 mA
High Level Supply Current ICCH IF=21mA
VCC=5V
4 10 mA
L-H Threshold Input Current IFLH VCC=5V 6 15 mA
Hysteresis IFHL/IFLH VCC=5V 0.9
Switching Speed L-H Propagation Time tPLH VCC=5V
IF=0<–>21mA
RL=280 W
3 µS
H-L Propagation Time tPHL 5
Rise Time tr 0.1
Fall Time tf 0.05
 

Dimensions

Aleph OJ-1001 Interrupter Type Opto Sensor

Dimensions in mm (1mm = 0.0394 inches)

 
Pinout Schematic
Aleph OJ-1001 Interrupter Type Opto Sensor (Bottom view) Aleph OJ-1001 Interrupter Type Opto Sensor
 

Typical Performance Curves

IF-Ta IF-VF Relative IFLH, IFLH-Ta
Aleph OJ-1001 Interrupter Type Opto Sensor Aleph OJ-1001 Interrupter Type Opto Sensor Aleph OJ-1001 Interrupter Type Opto Sensor
VOL-IOL VOL-Ta tpHL, tpLH-IF
Aleph OJ-1001 Interrupter Type Opto Sensor Aleph OJ-1001 Interrupter Type Opto Sensor Aleph OJ-1001 Interrupter Type Opto Sensor